Preparation of Silica–Alumina Hollow Spheres with a Single Surface Hole by Co-axial Microchannel

Si/Al composite hollow spheres with a surface hole were prepared with the co-axial microchannel in a one-step method. It is easy to use the technique for size control and continuous operation. At Si/Al ratio between 4 and 5, a hole forms on the surface, due to the fast gelation process and high viscosity of the sol. Scanning electron microscopy, nitrogen adsorption–desorption isotherms, and mercury intrusion method are used to characterize the samples. The hole size is 40–150 μm and the particle size is 450–600 μm. The size can be adjusted by the flow rate of the oil phase.

Monodispersed Si/Al composite hollow spheres with a single 40–150 μm surface hole in the co-axial microchannel were prepared by a one-step method.Figure optionsDownload as PowerPoint slide