Evaluation of Fractionation of Softwood Pulp in a Cylindrical Hydrocyclone1

Pulp fiber length characterization is addressed in this article. It is suggested that the proposed separation index H(L) is a viable index to the fiber fractionation performance for evaluating hydrocyclones. Fractionation of softwood (coniferous wood) bleached chemithermomechanical pulp (BCTMP) fiber was carried out with a cylindrical hydrocyclone. Pulp fiber length characteristics in different streams were examined using the fiber quality analyzer (FQA), and the cumulative fiber length fraction, the fiber length fraction density function and the separation index H(L) for different streams were obtained. It is found that H(L) is very useful for characterizing the fiber fractionation performance by indicating the separation capacity of hydrocyclone for individual subgroup of fibers in different streams under different operation conditions. Results of H(L) show that there exists a critical fiber length. A higher proportion of fibers longer than the critical fiber length is in the overflow stream, and a higher proportion of fibers shorter than the critical fiber length in the underflow stream. The data obtained from FQA suggest that the split ratio is the most significant parameter for fiber fractionation performance, which is the best when the split ratio is in the range between 0.14 and 0.2. The effect of feed rate on fiber fractionation performance is weak.