کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1697021 1012031 2013 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
High speed ball nose end milling of hardened AISI A2 tool steel with PCBN and coated carbide tools
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
High speed ball nose end milling of hardened AISI A2 tool steel with PCBN and coated carbide tools
چکیده انگلیسی

High speed machining (HSM) of tool steels in their hardened state is emerging as an attractive approach for the mold and die industry due to its potential for significant cost savings and productivity improvement. An experimental study was conducted to investigate the tool wear mechanism and surface integrity in high speed ball nose end milling of hardened AISI A2 tool steel using coated tungsten carbide and polycrystalline cubic boron nitride (PCBN) tools. It is found that coated carbide tools can only be used at low speed (120 m/min) while high content PCBN tools are suitable for HSM range (470 m/min). PCBN tools produce a damage free workpiece with better surface finish and less work hardening. Despite the higher tool cost, HSM with PCBN tools lead to reduction in both total cost and production time per part.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 15, Issue 4, October 2013, Pages 467–473
نویسندگان
, ,