کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1698444 1519306 2016 4 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning
ترجمه فارسی عنوان
تأثیر هندسه برش بر فرآیند ساخت نیرو در چرخش متناوب ☆
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی

In the intermittent turning and milling processes, during the entry phase the cutting edges are subjected to high impact loads that can give rise to dynamical and strength issues which in general cause tool life reduction. In this study the effect of geometrical features of the cutting tool on the force generation during the entry phase is investigated. Cutting forces are measured by a stiff dynamometer at a high sampling frequency. In addition, the chip load area is analyzed and related to the measured cutting force. The results show that micro-geometrical features, in particular the protection chamfer, significantly affect the force generation during the entry phase.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 46, 2016, Pages 364–367
نویسندگان
, , , ,