کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1698481 | 1519307 | 2016 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Increase of the Coefficient of Static Friction Using Turn-milling with an Inclined Milling Spindle
ترجمه فارسی عنوان
افزایش ضریب اصطکاک استاتیک با استفاده از تراشکاری با چرخش شیب افقی ☆
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
برش؛ اصطکاک استاتیک؛ یکپارچگی سطح؛ تردید. تراشکاری
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
There is a strong need for surfaces with a high coefficient of static friction to meet the demands for increasing performance and lightweight construction strategies, especially regarding friction-locked connections. An auspicious turn-milling process used to generate protruding surface structures which lead to a high coefficient of static friction is investigated. The influence of the corner geometry on the surface structure is examined by machining end faces of specimens of the steel 42CrMo4+QT (1.7225). Experimental tests for the identification of the coefficient of static friction show a significant increase up to 275% (μ0.1° = 0.55) for turn-milled surfaces in comparison to unstructured specimens (μ0.1 ≈ 0.2).
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 45, 2016, Pages 83–86
Journal: Procedia CIRP - Volume 45, 2016, Pages 83–86
نویسندگان
R. Funke, A. Schubert,