کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1699091 | 1519312 | 2016 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Improving Performance of Turn-milling by Controlling Forces and Thermally Induced Tool-center Point (TCP) Displacement
ترجمه فارسی عنوان
بهبود کارایی تراشکاری توسط کنترل نیرو و جابجایی مرکز ابزار نقطه حرارتی (TCP) ☆
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
Improving performance during fine turn-milling operations including accuracy and productivity requires controlling of the cutting forces and the thermally induced displacement of the cutting edge. The objective of this investigation is to determine the thermally induced displacement of TCP during turn-milling and to reduce this displacement by using pressurized cooled air. The forces and tool elongation simulated by FEM are compared to measured values. It was shown that the amount of tool elongation could be 40% of the depth of cut in fine turn-milling, and it is possible to predict the tool elongation by FEM. Furthermore, cooled air can reduce the tool elongation by 65%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Procedia CIRP - Volume 40, 2016, Pages 481-485
Journal: Procedia CIRP - Volume 40, 2016, Pages 481-485