کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
171010 458428 2007 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Plackett–Burman designs in the pretreatment of macroalgae for Pb, Cr and Al determination by GF-AAS
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Plackett–Burman designs in the pretreatment of macroalgae for Pb, Cr and Al determination by GF-AAS
چکیده انگلیسی

In this paper, a screening approach, involving the use of the Plackett–Burman experimental design, permitted the evaluation of the effects of 25 parameters from the sample pretreatment stage (furnace heating temperature, furnace heating duration, cooling, filtration, addition of HCl…) on the Pb, Cr and Al determination in macroalgae by graphite furnace atomic absorption spectrometry (GF-AAS). According to the found results, the influences of the different factors depend on the selected metal. Nevertheless, addition of the concentrated acids HF and HCl enhanced the analytical signals of all the metals. The effects of some parameters, such as filtration or cooling of samples, were negligible. These factors could be eliminated from the pretreatment stage to gain cost and time. The obtained results allowed the proposition of a method for the pretreatment of algae. This method was validated against BCR-CRM 279 sea lettuce (Ulva lactuca).

RésuméDans cet article, une approche de criblage, utilisant la matrice expérimentale d'Hadamard, a permis l'évaluation des effets de vingt-cinq paramètres de l'étape de prétraitement des échantillons (température de chauffage du four, durée de chauffage du four, refroidissement, filtration, addition de HCl…) sur la détermination du Pb, Cr et Al dans les macroalgues par spectrométrie d'absorption atomique à four graphite (SAA-E). D'après les résultats trouvés, les influences des différents facteurs dépendent du métal choisi. Néanmoins, l'addition des acides concentrés HF et HCl a augmenté les signaux analytiques de tous les métaux. Les effets de quelques paramètres, tels que la filtration ou le refroidissement des échantillons, étaient négligeables. Ces facteurs peuvent être éliminés de l'étape de prétraitement pour un gain de temps et de coût. Ces résultas ont permis la proposition d'une méthode de prétraitement des algues. Cette méthode a été validée avec le matériau de référence certifié BCR-CRM 279 (Ulva lactuca).

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Comptes Rendus Chimie - Volume 10, Issue 9, September 2007, Pages 839–849
نویسندگان
, , , ,