Forced convection condensation in the presence of noncondensable gas in a horizontal tube; experimental and theoretical study

• Experimental and theoretical study for forced convection condensation was conducted.
• The effects of mass fraction, velocity, pressure and wall sub-cooling were studied.
• A correlation for annular and wavy flow was proposed with an error of ±20%.
• The axial distributions of different temperatures along the tube were analyzed.

To have a better understanding on forced convection condensation with noncondensable gas inside a horizontal tube, an experimental research and theoretical investigation were conducted under annular and wavy flow. The effects of noncondensable gas mass concentration, mixture gases velocity, pressure and inner wall sub-cooling on the condensation heat transfer have been analyzed. The results indicate that the local heat transfer coefficient increases with the increase of the mixture inlet velocity and pressure while decreases with the increase of the noncondensable mass fraction and wall sub-cooling. Based on the above conclusions, an empirical correlation for predicting the local heat transfer coefficient was proposed which showed a good agreement with the experimental data with an error of ±20%. Furthermore, a theoretical model using the heat and mass transfer (HMT) analogy method was developed including the suction effect. The heat transfer capacity for the film, gaseous boundary and convective heat transfer of the bulk gases were compared along the tube. Besides, the axial distribution of the bulk gases and liquid–gas interface temperatures inside the tube were analyzed. The present theoretical model fits better with the experimental data compared with Lee's and Caruso's models for stratified flow.