کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
1747707 | 1018242 | 2014 | 10 صفحه PDF | دانلود رایگان |
In this paper, the planar images of diesel spray combustion flame and soot formation were measured and analyzed by using LII, in a constant volume combustion vessel. The effects of combustion flame and fuel–air mixing characteristics on soot formation and distribution of soot concentration were studied at different conditions. The result indicates that, with increase in ambient temperature and pressure, the ignition delay of diesel fuel is shorter. The increase of ambient temperature and pressure and the reduction of injection pressure shorten the diesel flame lift-off length. The lower the ambient temperature and pressure, the weaker LII signal intensity. At the same ambient temperature and pressure condition, the higher the diesel injection pressure, the smaller the soot production in diesel jet spray, and soot particles are primarily produced in the relative fuel-rich region, which is encompassed by the flame surface front at the downstream of the diesel jet.
Journal: Journal of the Energy Institute - Volume 87, Issue 4, November 2014, Pages 383–392