Wavelet based noise suppression technique and its application to ultrasonic flaw detection

The noise suppression techniques with wavelet transform (WT) are widely used in non-destructive testing and evaluation (NDT&E), especially in ultrasonics. Complete reconstruction theory with hard or soft thresholds, reconstruction technique based on the singularities of noise and signal, matched filter with an impulse response, and optimal frequency-to-bandwidth ratio of wavelet technique have all been used to analyze ultrasonic signals for noise suppression. But a more simple and effective technique has been pursued for decades. This paper develops a new technique using WT for the right purpose. In this work, WT is treated as a band-pass filter whose central frequency and frequency bandwidth (CF&FB) are determined by the spectra distribution of an ultrasonic signal captured from real testing situation. For the purpose of matching their CF&FB well, a technique for evaluating the optimal scale of a daughter wavelet is carried out too. By acting this daughter wavelet as a band-pass filter, we can obtain excellent de-noising results, even when the signal to noise ratio (SNR) is below −18 dB. The performance of the technique has been done by ultrasonic signals with computer generated white noises. Finally, the experimental verification is performed on a pipeline specimen with man-made small flaws with good results obtained. The results show that the technique is more suitable for processing heavy noised ultrasonic signals, and it can also be used in automatic flaw detection.