Counter-propagating plasma jet collision and shock formation on a compact current driver

In this paper we report on the ability of a compact current driver yielding 250 kA in 150 ns to produce counter-propagating plasma flows. The flows were produced by two vertically-opposed conical wire arrays separated by 1 cm, each comprised of 8 wires. With this array configuration, we were able to produce two supersonic plasma jets with velocities on the order of 100–200 km/s that propagate towards each other and collide. Aluminum wires were tested first; we observed a shock wave forming at the collision region that remained stationary for an extended period of time (∼50 ns) using optical probing diagnostics and Extreme Ultraviolet imaging. After this period, a bow shock is formed that propagates at 20 km/s towards the cathode of the array, likely due to small differences in the density and/or speed of the jets. The inter-jet ion mean free path was estimated to be larger than the shock scale length for aluminum, indicating that the shock is not mediated by collisions, but possibly by a magnetic field, whose potential sources are also discussed. Radiative cooling and density contrast between the jets were found to be important in the shock wave dynamics. We studied the importance of these effects by colliding jets of two different materials, using aluminum in one and copper in the other. In this configuration, the bow shock was observed to collapse into a thin shell and then to fragment, forming clumpy features. Simultaneously, the tip of the bow shock is seen to narrow as the bow shock moves at a similar speed observed in the Al–Al case. We discuss the similarity criteria for scaling astrophysical objects to the laboratory, finding that the dimensionless numbers are promising.