Microstrip patch array antenna on photonic crystal substrate at terahertz frequency

Recent advancement in the fabrication and packaging technology has led to the micrometer and nanometer-scale device modeling. This technological development and subsequent reduction in the dimension of devices like modulators, detectors and antennas has brought a thought of increasing the operating frequency of the system to the extent of sub-millimeter wavelength. In the view of the technical breakthrough in the area of fabrication and packaging, we have explored a printed antenna array on the photonic crystal in the terahertz spectrum in this paper. An equivalent circuit model of the antenna has been proposed and a methodology to investigate various electrical parameters is discussed. Tunable parameters of the structure have been explored to optimize the electrical performance of the proposed antenna. The analysis is also compared by using two simulators: (a) CST Microwave Studio based on finite integral technique and (b) Ansoft HFSS based on finite element method. The effect of the photonic crystal as substrate to enhance the gain of this kind of the antenna has also been demonstrated. The gain, directivity, front-to-back ratio (F/B ratio), and the radiation efficiency of the proposed antenna at 600 GHz is 16.88 dBi, 17.19 dBi, 14.77 dB and 89.72%, respectively. Finally, the performance of the antenna has been compared with the reported literature.

► Microstrip patch antenna at terahertz frequency has been analysed and designed.
► Photonic crystal has been used as the substrate.
► The effect of the substrate parameter on the gain of the antenna is presented.
► The performance of the antenna is compared with the reported litrature.