کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
1799434 1524850 2014 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
High magnetostriction parameters for low-temperature sintered cobalt ferrite obtained by two-stage sintering
ترجمه فارسی عنوان
پارامترهای مغناطیسی بالا برای فریت کبالت متخلخل با دمای پایین به دست آمده از طریق دو مرحله پخت
موضوعات مرتبط
مهندسی و علوم پایه فیزیک و نجوم فیزیک ماده چگال
چکیده انگلیسی


• Effect of two-stage sintering on the magnetostriction characteristics of CoFe2O4 is studied.
• Two-stage sintering is very effective for enhancing the density and the magnetostriction parameters.
• Higher magnetostriction for samples sintered at low temperatures and after magnetic field annealing.
• Highest reported magnetostriction of 380 ppm at low fields after two-stage, low-temperature sintering.

From the studies on the magnetostriction characteristics of two-stage sintered polycrystalline CoFe2O4 made from nanocrystalline powders, it is found that two-stage sintering at low temperatures is very effective for enhancing the density and for attaining higher magnetostriction coefficient. Magnetostriction coefficient and strain derivative are further enhanced by magnetic field annealing and relatively larger enhancement in the magnetostriction parameters is obtained for the samples sintered at lower temperatures, after magnetic annealing, despite the fact that samples sintered at higher temperatures show larger magnetostriction coefficients before annealing. A high magnetostriction coefficient of ~380 ppm is obtained after field annealing for the sample sintered at 1100 °C, below a magnetic field of 400 kA/m, which is the highest value so far reported at low magnetic fields for sintered polycrystalline cobalt ferrite.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Magnetism and Magnetic Materials - Volume 371, December 2014, Pages 121–129
نویسندگان
, ,