Manipulating the magnetoimpedance by dc bias current in amorphous microwire

We have studied the effect of the internal circumferential magnetic field HB created by the dc bias current IB on longitudinal and off-diagonal magnetoimpedance (MI) in amorphous microwire with helical anisotropy and experimentally demonstrated that by changing the dc current IB it is possible to considerably change the MI dependencies. The bias current applied to such microwire transforms the symmetric and hysteretic MI curve to asymmetrical and anhysteretic. The minimum of longitudinal MI curve shifts from the zero-field point. Reversing the bias current causes reversal of the bias field direction and results in a mirroring of the MI curves. It is proposed to apply a cross-checking of two MI curves with IB of different polarity for magnetic field sensing. In particular, this method allows to overcome the drawbacks usually associated with longitudinal MI—namely the impossibility to determine the direction of an external axial magnetic field HE and the low sensitivity near the zero-field point. Moreover, the operating range of the longitudinal MI sensor, in contrast to the off-diagonal one, can be much extended as it exhibits a quite high sensitivity in the field range up to one order of magnitude higher than the anisotropy field.

► DC bias current effect IB on magnetoimpedance (MI) in microwires with helical anisotropy was studied.
► We have found that the bias current considerably affects the MI.
► A cross-checking of two MI measurements with IB of different polarity is proposed.
► This allows to overcome the drawbacks usually associated with longitudinal MI.
► The operating range of the longitudinal MI sensor, in contrast to the off-diagonal one, can be much extended.