A conductometric biosensor for the estimation of the number of cleaving sites in peptides and proteins

A conductometric enzyme biosensor using proteinase K was developed and then tested to relate its electrical signal to the number of proteinase K hydrolysis sites in bovine serum albumin (BSA) and angiotensin, a ten amino acid peptide, with one cleaving site.The conductometric sensor presents a large linear range of response for BSA and angiotensin ranging from 0.5 to 8 mg/l and from 4 to 8 mg/l, respectively. For a same tested concentration (mg/l), the response for native BSA is 12 times higher than for angiotensin. Aspartam was used as negative test and no response was obtained with the proteinase K biosensor. The conductometric sensor permitted also to detect difference on enzyme activity on native and non-native BSA, a response three times higher was obtained for non-native BSA.