The estimation of basic experimental parameters in the fine-grained quartz multiple-aliquot regenerative-dose OSL dating of Chinese loess

The sensitivity-corrected multiple-aliquot regenerative-dose (MAR) protocol provides a reliable approach for fine-grained quartz optically stimulated luminescence (OSL) dating. For reliable estimation of the equivalent dose (De), we investigated certain basic experimental parameters in the fine-grained quartz MAR OSL dating of Chinese loess. (1) For suitable bleaching of the natural OSL signal of the regenerative-dose aliquots, the effect of bleaching duration using sunlight, SOL2 and blue LEDs on De was studied, and it is found that the appropriate method is a short-duration SOL2 (e.g. 5 min) or blue LEDs (e.g. 60 s) bleaching. (2) To select the appropriate test dose, the relationship between the test dose and De was investigated based on three samples having De values of approximately 11, 31 and 137 Gy respectively. It is suggested that the test dose for sensitivity correction may be limited to less than approximately 10–20 Gy. (3) Three commonly used fitting modes for quartz OSL growth curve were compared at three regenerative-dose scales. The results indicate that the mode of two saturating exponential functions plus a constant is appropriate and universal. (4) The comparison of De values derived using OSL approach with those obtained using the recuperated OSL (ReOSL) protocol shows that the reliable De estimation in the fine-grained quartz MAR OSL dating of Chinese loess may be limited to less than approximately 300 Gy. (5) The comparison of growth curves for 18 samples from the Weinan, Xifeng and Jingyuan sites shows that it is feasible to construct a standardized growth curve (SGC) for fine-grained quartz OSL signal in the Chinese Loess Plateau (CLP).

► A short-duration SOL2 (e.g. 5 min) or blue LEDs (e.g. 60 s) bleaching is suggested.
► The test dose may be limited to less than approximately 10–20 Gy.
► The fitting mode of two saturating exponential plus a constant is suggested.
► The range of reliable OSL De measurement may be less than approximately 300 Gy.
► An OSL SGC can be constructed for loess in the Chinese Loess Plateau.