Preparation and characterization of novel polyethylene/carbon nanotubes nanocomposites with core–shell structure

• Polyethylene carbon nanotube nanocomposite with core–shell structure was prepared.
• It was employed by immobilized Ziegler–Natta catalyst.
• MWCNTs were well dispersed into polymer matrix.
• The thermal and dielectric properties of the nanocomposites were evaluated.

Preparation of novel polyethylene/carbon nanotubes (CNTs) nanocomposites with core–shell structure was presented. The method involved in situ ethylene polymerization in which nanotube surface was treated with Grignard Agent, followed by reacting with active transition metal compound, TiCl4. The multiwalled carbon nanotubes (MWCNTs) supported catalysts polymerize ethylene to form polymer nanocomposite. MWCNTs were homogeneously dispersed within polymer matrix, and as expected, the resultant nanocomposites featured core–shell structure which was confirmed by HRTEM. For the nanocomposite, the microscopic examination of the cryogenically fractured surface not only ensured a good distribution of carbon nano-particles in the PE matrix but also revealed the ductile-like fracture. The Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) were employed for the study of covalent sidewall functionalization and chemical bonding environment of MWCNTs, also indicated effective immobilization of titanium catalyst on the MWCNTs surface. The crystalline properties, dielectric property and thermal stability of the nanocomposites were determined by WAXD, impedance analyzer and TGA. The dielectric result showed a slight decline of the dielectric constant of the nanocomposites with increase of the polymerization time, and lower dielectric loss was also observed.

Figure optionsDownload as PowerPoint slide