کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
236198 | 465665 | 2014 | 10 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Verification of EMMS formulation using lattice Boltzmann simulations Verification of EMMS formulation using lattice Boltzmann simulations](/preview/png/236198.png)
• Gas solid drag was compared for the EMMS model and lattice Boltzmann (LB) simulations.
• Discrepancies between the EMMS and LB predictions were observed at low gas volume fractions.
• These discrepancies were addressed by correcting the formulation of the EMMS model.
• The corrected EMMS was verified by LB simulations for a wide range of flow conditions.
Dilute gas–solid flow in riser exhibits inherent heterogeneity due to the formation of clusters. Conventional drag models within continuum CFD simulations cannot adequately capture the clusters. The drag models have therefore been modified using multi-scale approaches such as the energy minimization multi-scale (EMMS) model. The EMMS formulation needs to be critically evaluated before it can be confidently applied to simulate the riser flow. In this study, the EMMS model was verified by comparing the drag from the EMMS formulation with high resolution 3D lattice Boltzmann (LB) simulations. At cluster fraction higher than 0.3 and gas volume fraction lower than 0.9, the drag calculated by the EMMS model increases exponentially and gives unrealistic values for gas volume fraction lower than 0.86. Corrections to the equations for the drag forces in the EMMS formulation were suggested to overcome this anomaly. Calculated drag from the corrected EMMS model shows close agreement with the LB simulations over the entire range of the overall voidage, particle Reynolds number and multiple clusters. While finding cluster parameters at a given flow conditions needs cluster-scale experimental observations, this study verifies the formulation of the EMMS model paving the way to apply the EMMS model more confidently for dilute gas–solid flow.
Figure optionsDownload as PowerPoint slide
Journal: Powder Technology - Volume 257, May 2014, Pages 30–39