کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
238695 | 465769 | 2008 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A new correlation for predicting solids concentration in the fully developed zone of circulating fluidized bed risers A new correlation for predicting solids concentration in the fully developed zone of circulating fluidized bed risers](/preview/png/238695.png)
The present work focuses on developing a new comprehensive correlation for better prediction of the solids concentration in the fully developed region of co-current upward gas–solid flow in circulating fluidized bed (CFB) risers. Systematic experiments were carried out in two risers (15.1 m and 10.5 m high with the same 0.1 m i.d.) with FCC and sand particles. The results obtained from about 200 sets of operating conditions show that the average solids concentration in the fully developed region is more than just a function of the corresponding terminal solids concentration, as most previous correlations are based on. Operating conditions, particle properties and riser diameters also have significant effects on the solids concentrations in the fully developed region of CFB risers. Based on our experimental data and those reported in the open literature from CFB risers up to 0.4 m in diameter and 27 m in height with superficial gas velocities and solids circulation rates up to 11.5 m/s and 685 kg/m2·s, a new empirical correlation for predicting the average solids concentrations in the fully developed region of CFB risers is proposed. The correlation works well for a wide range of operating conditions, particle properties and riser diameters.
Graphical AbstractA new comprehensive correlation for better prediction of the solids concentration in the fully developed region of circulating fluidized bed (CFB) risers is proposed. Results show that operating conditions, particle properties and riser diameters have significant effects on the solids concentrations in the fully developed region of CFB risers. The correlation works well for a wide range of operating conditions, particle properties and riser diameters.Figure optionsDownload as PowerPoint slide
Journal: Powder Technology - Volume 188, Issue 1, 2 December 2008, Pages 64–72