کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
238806 465775 2007 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی مهندسی شیمی (عمومی)
پیش نمایش صفحه اول مقاله
Recovery of nickel powder from copper bleed electrolyte of an Indian copper smelter by electrolysis
چکیده انگلیسی

When nickel concentration increases in the copper sulphate electrolyte during electrolysis, it starts electrodepositing on the copper cathode thereby affecting the purity of the copper. In order to produce high quality copper cathodes with less than 1 ppm Ni, it became necessary to bleed-off large volumes of foul electrolyte contaminated with nickel and other impurities. The study reported in this paper was part of the effort aimed at devising a cost effective and an ecofriendly method for the production of value added powders from a waste stream, for P/M application. A part of copper salts and regenerated acid was used back into the system. As discussed in our paper on copper recovery from copper bleed stream (CBS), a process involving decopperisation and crystallisation–solvent extraction (SX) separation–electrowinning (EW) has been attempted as an alternative to the conventional process. Optimum conditions for nickel recovery from this type of solution have been investigated through a series of experiments carried out in a rectangular electrolytic bath with SS as cathode and Pb–Sb as anode. A quantitative and selective recovery was found for nickel deposition under suitable conditions. The purity of the electrolytic nickel powders so produced was found to be 99.89%. The compact density of the annealed nickel powder was 7.72 g/cc. Other properties of the nickel powders such as flow-ability, particle size, etc. were also evaluated to assess its suitability for its use in P/M applications.

A cost effective and an ecofriendly method has been devised for the production of pure nickel powder from copper bleed stream for P/M application. The process steps involved are decopperisation–crystallisation–solvent extraction–electrowinning as shown in the figure. Optimum conditions for quantitative and selective nickel recovery of pure nickel powder by electrowinning have been investigated in detail.Figure optionsDownload as PowerPoint slide

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Powder Technology - Volume 177, Issue 3, 25 August 2007, Pages 133–139
نویسندگان
, , , , ,