The EU CONCERTO project Class 1 – Demonstrating cost-effective low-energy buildings – Recent results with special focus on comparison of calculated and measured energy performance of Danish buildings

In 2007 the Class 1 project commenced. Originally, 442 dwellings were to be designed and constructed as “low-energy class 1” houses according to requirements set by the Municipality of Egedal/Denmark. This means that the energy consumption is 50% below the existing energy regulations. Sixty five dwellings and about 30 single family houses have been constructed. The Concerto community also includes a kindergarten (completed) and an elderly centre. Currently, because of the financial crisis, only about 200 new dwellings will be constructed. Therefore, a contingency plan (plan B) has been developed replacing some of the new dwellings with renovation projects for public buildings. Simultaneously the originally planned district heating network supplied from a relatively small bio-gasification plant has been substantially enlarged to cover a large part of the existing Stenloese town as well and a large wood-chip heating plant has been added.The project demonstrates the benefits of ultra-low-energy buildings integrated with biomass- and solar heating energy supply.The Class 1 project involves four other countries: Estonia, France, Italy and Romania. These countries develop training activities based on the results and experiences gained from the Danish housing projects.This paper describes the comparisons between measured and calculated energy consumption in a social housing settlement and in a detached single-family house. Results show relatively large discrepancies between measured and calculated results, and discussions on possible explanations are given.

► We present the recent results of the EU CONCERTO project.
► Results include technological development of energy saving measures.
► We present measurements for low-rise high density low-energy dwellings.
► We present measurements for a low-energy single-family house.
► We compare measurements to calculations.