Energy capture by a small wind-energy conversion system

Furling is the most common method used by the small wind-turbine industry to control the aerodynamic power extraction from the wind. A small wind-turbine with furling mechanism and its resulting dynamics are modelled using Matlab/Simulinkplatform in this paper. The model simulates regulating the speed of the wind-turbine via a load-control method. Tip-speed ratio and hill-climbing control methods for maximum-power extraction from a small wind-turbine are investigated. Two dynamic controllers are designed and their behaviours simulated. In the first method, the controller uses the wind-speed and rotor speed information to control the load in order to operate the wind-turbine at its optimal tip-speed ratio. In the second method, the controller compares the output power of the turbine with the previous power, and controls the load based on the power difference. In order to determine a suitable control strategy for the small wind-energy conversion system, several tests are performed. Wind-speed versus power-curve and annual energy capture of the system for each control method are determined for wind conditions in St. John’s, Newfoundland. The annual energy-capture is determined using the bin’s power-curve method. Wind-speed data and Rayleigh distribution of St. John’s, Newfoundland are used to determine the annual energy-capture. The results of the simulations indicate that the energy capture of a wind-turbine depends not only on the control strategy but on the wind-speed and Rayleigh distribution. The results of the investigation lead to the conclusion that the hill-climbing method of control results in a greater annual energy-output.