کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
252944 | 502978 | 2010 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of manufacturing methods on the shear strength of composite single-lap bonded joints
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The present paper experimentally addresses the effect of manufacturing methods on the strength of composite bonded joints. A total of 391 specimens, manufactured by four different fabrication methods, were tested. For each method, various overlap lengths, adherend thicknesses and lay-up patterns were examined. The failure strength was higher in thicker adherend joints and lower in specimens with larger overlap length. Results showed that the secondary bonded joints had higher strength than the co-bonded and adhesively cocured joints and yielded similar strength compared with the non-adhesive cocured case. Changes in the stacking sequence also affected the interlaminar stresses and failure loads.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 92, Issue 9, August 2010, Pages 2194–2202
Journal: Composite Structures - Volume 92, Issue 9, August 2010, Pages 2194–2202
نویسندگان
Min-Gyu Song, Jin-Hwe Kweon, Jin-Ho Choi, Jai-Hyun Byun, Min-Hwan Song, Sang-Joon Shin, Tae-Joo Lee,