Transverse shear modulus and strength of honeycomb cores

The transverse shear mechanical behavior and failure mechanism of aluminum alloy honeycomb cores are investigated by the single block shear test in this paper. The transverse shear deformation process of honeycomb cores may be approximately categorized into four stages, namely elastic deformation, plastic deformation, fracture of cell walls and debonding of honeycomb cores/facesheets. The elastic deformation of unit cell under transverse shear displacement is also investigated by the finite element method, and the result shows that the bending deformation of the cell walls is similar to that of the cantilever beam. In order to precisely predict the equivalent transverse shear modulus and strength, not only shear deformation but also bending deformation of cell walls should be considered. Therefore, in the present paper, the equivalent transverse shear modulus and strength are predicted by application of the cantilever beam theory and thin plate shear buckling theory in conjunction with simplifying assumption as to the displacement in the cores. It is concluded that the contribution of bending deformation of cell walls to equivalent transverse shear modulus and strength is obvious with the decreasing height of cell walls.