کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
254184 | 503054 | 2006 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Composite-to-aluminum double lap joints were tested to obtain the failure loads and modes for three types of joints: adhesive bonding, bolt fastening and adhesive-bolt hybrid joining. A film type adhesive FM73 and a paste type adhesive EA9394S were used for aluminum and composite bonding. A digital microscope camcorder was used to monitor the failure of the joints. It was found that hybrid joining improves joint strength when the mechanical fastening is stronger than the bonding, as when the paste type adhesive is used. On the other hand, when the strength of the bolted joint is lower than that of the bonded joint, as when the film type adhesive is used, bolt joining contributes little to the strength of the hybrid joint.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 75, Issues 1–4, September 2006, Pages 192–198
Journal: Composite Structures - Volume 75, Issues 1–4, September 2006, Pages 192–198
نویسندگان
Jin-Hwe Kweon, Jae-Woo Jung, Tae-Hwan Kim, Jin-Ho Choi, Dong-Hyun Kim,