Thermal characterization of gypsum boards with PCM included: Thermal energy storage in buildings through latent heat

This work studies the thermal behavior of a new construction material: gypsum board containing 45% by weight of phase change materials (PCMs) reinforced with additives.A facility has been designed and built to simulate the hygrothermal conditions of any room or building. The influence of different parameters and variables regarding heat storage in buildings (air temperature, air velocity, material position, and so on) has been studied.The thermal storage capacity of different construction materials with similar use and position in buildings than boards with PCMs – laminated gypsum boards, bricks, etc. – has been evaluated and compared.It has been proved that a 1.5 cm-thick board of gypsum with PCMs stores 5 times the thermal energy of a laminated gypsum board, and the same energy as a 12 cm-thick brick wall within the comfort temperature range (20–30 °C).This work demonstrates the suitability of incorporating PCMs into gypsum boards to increase heat storage capacity and to reduce energy consumption.

.Figure optionsDownload as PowerPoint slideHighlights
► A new building element is introduced: a gypsum board containing a 44.5% in weight of PCMs.
► This improves the thermal inertia (5 times more than a regular gypsum board and the same as a brick wall).
► Reinforcement materials have been added too to comply with the regulations.
► Thermal behavior of the new compound material has been studied.