Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material

This paper is aimed at analyzing the thermal characteristics of packed bed containing spherical capsules, used in a latent heat thermal storage system with a solar heating collector. Myristic acid is selected as phase change material (PCM), and water is used as heat transfer fluid (HTF). The mathematical model based on the energy balance of HTF and PCM is developed to calculate the temperatures of PCM and HTF, solid fraction and heat release rate during the solidifying process. The latent efficiency, which is defined as the ratio between the instantaneous released latent heat and the maximum released heat, is introduced to indicate the thermal performances of the system. The inlet temperature of HTF (50 °C), flow rate of HTF (10 kg/min) and initial temperature of HTF (66 °C) were chosen for studying thermal performances in solar heat storage system. The influences of inlet temperature of HTF, flow rate of HTF and initial temperatures of HTF and PCM on the latent efficiency and heat release rate are also analyzed and discussed.