Condition assessment of reinforced concrete beams using dynamic data measured with distributed long-gage macro-strain sensors

A new condition assessment strategy of reinforced concrete (RC) beams is proposed in this paper. This strategy is based on frequency analysis of the dynamic data measured with distributed long-gage macro-stain sensors. After extracting modal macro-strain, the reference-based damage index is theoretically deducted in which the variations of modal flexural rigidity and modal neutral axis height are considered. The reference-free damage index is also presented for comparison. Both finite element simulation and experiment investigations were carried out to verify the proposed method. The manufacturing procedure of long-gage fiber Bragg grating (FBG) sensor chosen in the experiment is firstly presented, followed by an experimental study on the essential sensing properties of the long-gage macro-strain sensors and the results verify the excellent sensing properties, in particular the measurement accuracy and dynamic measuring capacity. Modal analysis results of a concrete beam show that the damage appearing in the beam can be well identified by the damage index while the vibration testing results of a RC beam show that the proposed method can not only capture small crack initiation but its propagation. It can be concluded that distributed long-gage dynamic macro-strain sensing technique has great potential for the condition assessment of RC structures subjected to dynamic loading.

► A new condition assessment method for RC beams using distributed long-gage dynamic macro-strain was developed.
► Theoretical analysis indicates that the proposed dynamic damage index can reflect the damage state of RC structures.
► Modal analysis results of a concrete beam confirmed the proposed dynamic damage index.
► RC beam vibration testing verified the capacity of capturing crack initiation and propagation using the damage index.