Theoretical development of a simplified wheelset model to evaluate collision-induced derailments of rolling stock

A theoretical method is proposed to predict and evaluate collision-induced derailments of rolling stock by using a simplified wheelset model and is verified with dynamic simulations. Because the impact forces occurring during collision are transmitted from the car body to the bogies and axles through suspensions, rolling stock leads to derailment as a result of the combination of horizontal and vertical impact forces applied to the axle and a simplified wheelset model enforced at the axle can be used to theoretically formulate derailment behaviors. The derailment type depends on the combination of the horizontal and vertical forces, the flange angle and the friction coefficient. According to collision conditions, wheel-climb, wheel-lift or roll-over derailment can occur between the wheel and the rail. In this theoretical derailment model of a simplified wheelset, the derailment types are classified as Slip-up, Slip/roll-over, Climb-up, Climb/roll-over and pure Roll-over according to the derailment mechanisms between the wheel and the rail and the theoretical conditions needed to generate each derailment mechanism are proposed. The theoretical wheelset model is verified by dynamic simulation and its applicability is demonstrated by comparing the simulation results of the theoretical wheelset model with those of an actual wheelset model. The theoretical derailment wheelset model is in good agreement with the virtual testing model simulation for a collision-induced derailment of rolling stock.

► We proposed a theory to evaluate collision-induced derailments of rolling stock.
► As a theory, we proposed a wheelset model and verified with dynamic simulations.
► Its applicability is demonstrated by comparing the simulation results.
► The theoretical derailment wheelset model is in good agreement with the virtual testing model.