Predictive model of squeal noise occurring on a laboratory brake

This paper on brake squeal instability presents a reduced order model of a laboratory brake considered in a previous paper, and presents a description of the squeal mechanism occurring during experiments.The model uses the modal parameters of the laboratory brake components, the disc and the caliper, when they are not in contact between them. Successively, the caliper and the disc are put in contact through the pad that is modeled as a one degree of freedom system while the Coulomb law models the friction interaction between them. No stick slip motion of the pad is considered, because it was not observed in the experimental tests. As a result the model is linear and particularly suited for a parametric analysis.The stability of the model is studied by a complex eigenvalue analysis and the obtained results show a good agreement with the experimental data, provided that the key parameters of the model are consistent with the experimental set-up. The key role of the disc and the pad dynamics are discussed.