Assessment of near-field pollutant dispersion: Effect of upstream buildings

The prediction of pollutant dispersion in urban environment is an extremely complex phenomenon, particularly in the vicinity of a cluster of buildings. Dispersion of effluents released from stacks located on building roofs are severely affected by adjacent surroundings. This paper investigates the impact of an upstream building on the near field of a pollutant source in terms of dilution distribution on the roof of an emitting building. The study was carried out using Computational Fluid Dynamics (CFD) approach with Realizable k–ε for turbulent flow modeling. A limited number of cases were also modeled in a wind tunnel for validation purposes. The study shows that when the source is located within the recirculation zone, dilution is highly sensitive to the height of the upstream building and much less sensitive to the width and length of the upstream building. It is also shown that dilution value has an asymptotic behavior which defines the particular point where dilution becomes independent of the upstream building configuration. Some discrepancies between CFD and wind tunnel data were found, specifically for extreme configurations e.g. significantly taller upstream building. These differences are mainly due to the inherent unsteady fluctuations in the wake of buildings which are not detectable by RANS.

► Computational (RANS) and wind tunnel modeling for flows and dispersion around buildings were conducted.
► Effect of a building placed upstream to an emitting building was considered.
► Impact of changing height, width and length of the upstream building was analyzed.
► Discrepancies between numerical and experiment modeling were discussed.