کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
295033 511515 2015 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
In-situ monitoring of fatigue crack growth using high frequency guided waves
ترجمه فارسی عنوان
مانیتورینگ در محل رشد خستگی با استفاده از امواج هدایت شده با فرکانس بالا
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی


• High frequency guided ultrasonic wave propagation in aerospace structures.
• Adequate propagation distance and detection sensitivity for small defects.
• Standard pulse–echo measurements for monitoring of fatigue cracks at fastener hole.
• Fatigue crack detection from stand-off distance without access to damage location.

The development of fatigue cracks at fastener holes represents a common maintenance problem for aircraft. High frequency guided ultrasonic waves allow for the monitoring of critical areas without direct access to the defect location. During cyclic loading of tensile, aluminum specimens fatigue crack growth at the side of a fastener hole was monitored. The changes in the energy ratio of the baseline subtracted reflected guided wave signal due to the fatigue damage were monitored from a stand-off distance using standard ultrasonic pulse–echo measurement equipment. Good sensitivity for the detection and monitoring of fatigue crack growth was found.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: NDT & E International - Volume 71, April 2015, Pages 1–7
نویسندگان
, ,