MFL signals and artificial neural networks applied to detection and classification of pipe weld defects

This work evaluates the use of artificial neural networks (ANNs) for pattern recognition of magnetic flux leakage (MFL) signals in weld joints of pipelines obtained by intelligent pig. Initially the ANNs were used to distinguish the pattern signals with non-defect (ND) and signals with defects (D) along of the weld bead. In the next step the ANNs were applied to classify signal patterns with three types of defects in the weld joint: external corrosion (EC), internal corrosion (IC) and lack of penetration (LP). The defects were intentionally inserted in the weld bead of a pipeline of API 5L-X65 steel with an outer diameter of 304.8 mm. In this way, the MFL signal itself, digitized with 1025 points, was used as the ANN input. Initially the signals were used as inputs for the neural network without any type of pre-processing, later four types of pre-processing were applied to the signals: Fourier analysis, Moving-average filter, Wavelet analysis and Savitzky–Golay filter. Signal processing techniques were employed to improve the performance of the neural networks in distinguishing between the defect classes.The results showed that it is possible to classify signals of classes D and ND using ANN with very efficient results (94.2%), as well as for corrosion (CO) and LP signals (92.5%). Also it is possible to classify the defect pattern signals: EC, IC and LP using neural networks with an average rate of success of 71.7% for the validation set.