Buckling of cylindrical open-topped steel tanks under wind load

• Six practical open-topped tanks with volumes of 2×103 m3–100×103 m3 and H/D<1 are investigated.
• Stability bearing capacity of wind load decreases as aspect ratio decreases for practical tanks.
• Wind buckling behavior of tanks is governed by positive wind pressure in windward region.
• The buckling-mode imperfection leads to a considerable reduction of wind buckling resistance.
• Buckling resistance is correlative with wall thickness reduction, stored liquid and wind girder.

Vertical cylindrical welded steel tanks are typical thin-walled structures which are very susceptible to buckling under wind load. This paper investigates the buckling behavior of open-topped steel tanks under wind load by finite element simulation. The analyses cover six common practical tanks with volumes of 2×103 m3 to 100×103 m3 and height-to-diameter ratios H/D<1. The linear elastic bifurcation analyses are first carried out to examine the general buckling behavior of tanks under wind load, together with comparison to that of tanks under uniform pressure and windward positive pressure (only loaded by positive wind pressure in the windward region). The results show that for larger tanks in practical engineering, the stability carrying capacity of wind load is relatively lower. It is also indicated that the buckling behavior of tanks under wind load is governed by the windward positive pressure while wind pressure in other region of tank essentially has no influence on the buckling performance. The geometrically nonlinear analyses are then conducted to investigate the more realistic buckling behavior of tanks under wind load. It is found that the buckling behaviors of perfect tanks and imperfect tanks are much different. The weld induced imperfection only has little influence on the wind buckling behavior while the classical buckling mode imperfection has significant influence, leading to a considerable reduction of wind buckling resistance. The influences of thickness reduction of cylindrical wall, liquid stored in the tank and wind girder on the buckling behavior are also examined. It shows that the thickness reduction of cylindrical wall considerably reduces the wind buckling resistance while sufficient liquid stored in the tank and wind girder significantly increase the wind buckling resistance.