کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
310076 | 513655 | 2008 | 13 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: A numerical study of the influence of bump type triggers on the axial crushing of top hat thin-walled sections A numerical study of the influence of bump type triggers on the axial crushing of top hat thin-walled sections](/preview/png/310076.png)
This paper deals with the issue of a trigger design and its performance. In this respect, a numerical investigation is carried out to study the effects of the geometrical features of a bump type trigger on the crush behavior of an energy absorbing member subjected to axial impact loading. The member was constructed by joining a top hat profile with a flat lid. The trigger was considered to be a bump with a semi-circular cross section on the hat profile. The finite element solver, LS-DYNA was used in all crush simulations. As a result, the introduction of the trigger was found to be effective on the peak crush force and the energy absorption capability of the member under axial impact loading. It was also shown that the crush response could be controlled by varying the location and the geometry of the trigger.
Journal: Thin-Walled Structures - Volume 46, Issue 10, October 2008, Pages 1094–1106