| کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
|---|---|---|---|---|
| 486949 | 703534 | 2016 | 4 صفحه PDF | دانلود رایگان |
کلمات کلیدی
1.مقدمه
شکل 1 (چپ) فرایند ذاتی FDD برای تجهیزات یکپارچه HVAC
شکل 2(راست) مشخصه های اضافه سایزینگ کمپرسور RTU برای اضافه سایز یک مرحله ای
2-روش شناسی
جدول 1: معادلات و پارامترهای تشخیص اضافه سایز
جدول 2: معادلات و پارامترهای الگوریتم تعمیر نرم
3-نتایج
4-نتیجه گیری
Heating, ventilation, air-conditioning and Refrigeration (HVAC&R) systems are seldom designed or commissioned properly. The situation leads to abrupt or degradation faults resulting in inefficient energy uses, excessive energy consumption and high service costs. To solve these aforementioned problems, fault detection and diagnosis (FDD) is utilized to firstly detect any abnormal conditions of a system and then diagnoses and determines their causes. In order to apply this concept in HVAC oversizing designs, this paper proposes the state-of-art procedure of a FDD procedure for analyzing the inherently faulty design (oversizing) of multiple packaged air-conditioning units used to supply cooling for an open space in light commercial buildings. A generic process of FDD for a packaged unit is briefly introduced to efficiently design FDD algorithms and to illustrate an overview picture for new researchers in FDD areas. In the procedures, compressor statuses, time-on and time-off operations and outdoor air temperatures are recorded by means of the on-board controller of each machine unit. These physical and electrical monitoring data are applied to diagnose and evaluate oversizing level in terms of runtime fraction (RTF) and cycling rate (N). Eventually, an adaptive control is designed and implemented to enhance process recovery for soft-repairing and permanently reducing fault effect caused by oversizing without intervening system operations (non-invasive technology).
Journal: Procedia Computer Science - Volume 86, 2016, Pages 341–344