کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4911823 1428529 2017 24 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Characterization of metal grid-structure reinforced aluminum foam under quasi-static bending loads
ترجمه فارسی عنوان
مشخصات فوم آلومینیوم تقویت شده از شبکه های فلزی تحت بار خمشی شبه استاتیک
کلمات کلیدی
فوم آلومینیوم، ساختار فلزی شبکه، خم شدن سه نقطه، حالت تغییر شکل ظرفیت جذب انرژی،
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
This paper investigates the bending property of metal grid-structure reinforced aluminum foam (MGS-AF) prepared by a melt foaming technique. For this purpose, quasi-static three-point bending tests of aluminum foam with and without metal grid-structures (MGSs) were performed. Experimental results indicate that the failure mode of MGS-AF was transformed from a single tensile failure to a combination of both tensile failure and compressive failure. Yield stress improved from 2.92 to 3.81 MPa for traditional aluminum foam to 6.58-8.41 MPa for MGS-AF. Also, a wide amplitude of stress plateau was detected after yield deformation. Additionally, the existence of MGS significantly improved the energy absorption capacity from 3.0 to 37.1-53.1 J and enhanced the specific energy absorption from 0.15-0.17 J/g to 1.34-1.50 J/g under the same deflection of 25 mm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 178, 15 October 2017, Pages 288-296
نویسندگان
, , , ,