کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4917711 1428525 2017 12 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Static analysis of thin-walled laminated composite closed-section beams with variable stiffness
ترجمه فارسی عنوان
تجزیه و تحلیل استاتیکی پرتو های کامپوزیتی نازک دیواره های بسته بندی شده با سفتی متغیر
کلمات کلیدی
مواد کامپوزیتی، تیرهای نازک دیواره، سختی متغیر، تجزیه و تحلیل عنصر محدود،
ترجمه چکیده
در این مطالعه رفتار استاتیک پرتو های کامپوزیتی نازک دیواره های مقطع بسته با سفتی متغیر مورد بررسی قرار گرفته است. مدل تحلیلی استفاده شده برای اتصالات خمشی - پیچشی و اصلاح شده و همچنین سفتی متغیر در طول کانتور مقطع پرتو، مورد استفاده قرار می گیرد. متغیر سختی با ساختن ورقه ورقه با الیاف منحنی که دارای مسیر خاص خاص است، به دست می آید. جهت گیری فیبرها بسته به مسیر فیبر در امتداد کانتور مقطع عرضی هر لایه متفاوت است. معادلات تعادل با استفاده از حداقل انرژی انرژی بالقوه مشتق می شوند. اگر چه فرمول بندی داده شده می تواند به هر شکل از مقطع بسته با لبه های مستقیم یا منحنی اعمال شود، نتایج عددی اولیه فقط برای پرتوهای جعبه ارائه می شود. روش المان محدود بر اساس جابجایی برای حل مدل تحلیلی و پیش بینی جابجایی و چرخش تحت تاثیر انواع مختلف شرایط بارگیری توسعه داده شده است. نتایج عددی برای مسیرهای مختلف فیبر و پیکربندی های پایه بدست آمده و در مقایسه با راه حل های موجود در ادبیات نیز با نتایج یک نرم افزار تحلیل عاملی محدود با استفاده از عنصر پوسته به دست می آید.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
Static behavior of thin-walled laminated composite closed cross-section beams having variable stiffness is investigated in this study. The analytical model used accounts for flexural-torsional coupling and warping effects as well as the variable stiffness along the contour of the cross-section of the beam. The variable stiffness is acquired by constructing the laminates with curvilinear fibres having certain specific paths. The orientation of fibres varies by depending on the fibre path along the contour of the cross-section in each layer. Equilibrium equations are derived by use of minimum potential energy principle. Although the formulation given can be applied to any shape of the closed cross-section with straight or curved edges, preliminary numerical results are presented only for box-beams. A displacement based finite element method is developed to solve the analytical model and to predict displacements and rotations under the effect of different types of loading conditions. Numerical results are obtained for different fibre paths and lay-up configurations and compared with the available solutions in the literature also with the results of a finite element analysis software using shell element.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composite Structures - Volume 182, 15 December 2017, Pages 67-78
نویسندگان
, ,