کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4923433 | 1430695 | 2017 | 19 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Evaluation of the rotation capacity limits of steel members defined in EC8-3
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Evaluation of the rotation capacity limits of steel members defined in EC8-3 Evaluation of the rotation capacity limits of steel members defined in EC8-3](/preview/png/4923433.png)
چکیده انگلیسی
One issue of major importance regarding the application of seismic assessment guidelines is that of the deformation capacity limits prescribed for the various limit states. In the case of existing steel structures, Part 3 of Eurocode 8 (EC8-3) defines the limits in terms of plastic rotations, which are only applicable to cases where normalized axial load levels are lower than 0.3 and to cross-section classes of type 1 and 2. These limits resemble the ones defined in ASCE 41, suggesting a direct reproduction from the latter document despite their derivation on the basis of typical American profiles. Hence, this paper aims at evaluating the deformation capacity of European steel members and to answer the question of how adequate are the current EC8-3 limits. Based on detailed FE models, the influence of member imperfections, axial load and real ground motion records is assessed. Fracture due to ultra-low cycle fatigue is taken into account and general expressions for predicting the rotation capacity of a wide number of European cross-section profiles are proposed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Constructional Steel Research - Volume 135, August 2017, Pages 11-29
Journal: Journal of Constructional Steel Research - Volume 135, August 2017, Pages 11-29
نویسندگان
Miguel Araújo, LuÃs Macedo, José Miguel Castro,