کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4924037 1430832 2017 15 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Direct adaptive feedforward compensation of narrowband disturbances without explicit identification of the secondary path model
ترجمه فارسی عنوان
غربالگری مستقیم انعطافپذیر مستقیم برای اختلالات باند بدون شناسایی صریح مدل مسیر ثانوی
ترجمه چکیده
اثربخشی الگوریتم های رایج برای جبران فیدبک تخریب باند باند به طور عمده بستگی به کیفیت مدل دارد. برای جلوگیری از این وابستگی، چندین الگوریتم کنترل مستقیم تطبیقی ​​بدون مدل صحیح شناسایی ثانویه در سال های گذشته توسعه یافته است. با این حال یک مرور کلی از خواص آنها و مقایسه عملکرد آنها در یک معیار استاندارد وجود دارد هنوز وجود دارد. در این مقاله، سه الگوریتم امیدوار کننده برای کنترل لرزش ورودی باریک باند برای استفاده در ماشین آلات چرخش اصلاح شده است. همانطور که در این برنامه، سیگنال مرجع با استفاده از اندازه گیری فرکانس از یک سنسور سرعت تولید می شود، می توان فرض کرد که بین اندازه گیری مرجع و مسیر ثانویه هیچ اتصالی وجود ندارد. ابتدا الگوریتم ها در شبیه سازی مورد آزمایش قرار می گیرند، سپس در یک تست برای کنترل لرزش فعال از لرزش روتور القایی ناشی از تعادل انجام می شود. در شبیه سازی و همچنین برای آزمایش تست عملکرد الگوریتم ها با یکدیگر مقایسه می شوند. مزایا و معایب الگوریتم ها مورد بحث قرار گرفته و دستورالعمل های عملی برای پیاده سازی ارائه شده است. کار در نظر گرفته شده است به عنوان نقطه شروع و انگیزه برای تحقیقات آینده در این زمینه مطالعه.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی عمران و سازه
چکیده انگلیسی
The effectiveness of common algorithms for feedforward compensation of narrowband disturbance depends mainly on the model quality. To avoid this dependency several direct adaptive control algorithms without explicitly identified secondary path models have been developed over the last years. However an overview of their properties and a comparison of their performances in a standardized benchmark is still lacking. In this paper the three most promising algorithms are modified for narrowband feedforward vibration control for the use in rotating machinery. As in this application the reference signal is generated using the frequency measurement from a speed sensor it can be assumed that there is no coupling between reference measurement and the secondary path. First the algorithms are tested in simulation, then they are implemented on a test rig for active vibration control of unbalance induced rotor vibration. In simulation as well as for the test rig the performances of the algorithms are compared to each other. Advantages and drawbacks of the algorithms are discussed and practical instructions for implementation are given. The work is intended to serve as starting point and motivation for future research in this field of study.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Sound and Vibration - Volume 401, 4 August 2017, Pages 282-296
نویسندگان
, , ,