کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4928523 | 1432072 | 2017 | 12 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Flattening process on folded quadrangular columns under the lateral loading- a novel energy absorption method
ترجمه فارسی عنوان
فرآیند مسطح کردن بر روی ستونهای چهار گوشه ای چیده شده تحت بارگذاری جانبی - یک روش جذب انرژی جدید
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فرآیند مسطح نمونه انباشته شده بخش های چهار گوشه، انرژی خاص جذب شده، بخش نازک دیواره،
ترجمه چکیده
این مقاله یک روش جدید برای بهبود عملکرد جذب انرژی ستون های نازک با مقطع مربع و مستطیلی تحت بارگذاری فشرده سازی جانبی شبه استاتیک در طول فرایندهای متفاوتی جهت جانبی است. اولا، برخی ستون های مستطیلی مربع و مستطیل ساخته شده از آلومینیوم و آلیاژهای برنجی در جهت محوری برای تبدیل آنها به ستون های تاشو فشرده می شوند. سپس، نمونه های خورده شده در چهار فرآیند جذب انرژی جانبی جانبی به عنوان نمونه های اولیه مورد استفاده قرار می گیرند. تمام تست های تطبیقی جانبی بین پانل های سفت و سخت انجام می شود. تمام نمونه های مورد استفاده در چهار فرایند صاف کردن با ستون های مربع و مستطیل اولیه آماده می شوند. در یک روند فشرده سازی، نمونه های چهارگوش ساده استفاده می شود. در فرایند دوم به عنوان یک فرآیند مسطح جدید، نمونه های بسته بندی شده آزمایش می شوند. علاوه بر این، در دو فرآیند دیگر، نمونه اولیه از فرایندهای مسطح سازی جدید، با کشیدن و برش نمونه های چهار ضلعی ساده تهیه می شود. اثرات پارامترهای مختلف شامل نوع ماده، ضخامت دیوار، نسبت ابعاد مقطعی و طول نمونه و همچنین نوع فرآیند پهن سازی و جهت بارگذاری جانبی در مورد جذب انرژی انرژی نمونه های چهار گوشه مورد بحث قرار می گیرد. در مجموع، آزمایش های انجام شده نشان می دهد که فرآیند جذب انرژی جانبی جانبی جدید، انرژی خاص جذب شده توسط نمونه های چهارگوشه را تا 7 بار افزایش می دهد؛ و افزایش کل انرژی جذب خود را بیش از 13 برابر از نمونه های ساده متناظر.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی عمران و سازه
چکیده انگلیسی
This article introduces a novel method to improve energy absorption performance of thin-walled columns with square and rectangular cross-sections subjected to distributed quasi-static lateral compression loading during different lateral flattening processes. Firstly, some square and rectangular columns made of aluminum and brass alloys are compressed in the axial direction to transform them into folded columns. Then, the folded specimens are used in four different lateral energy absorption processes as initial samples. All the lateral flattening tests are carried out between rigid platens. All the used specimens in the four flattening processes are prepared by initial simple square and rectangular columns. In one flattening process, the simple quadrangular specimens are used. In the second process as a novel flattening process, the folded samples are tested. Furthermore, in two other processes, the initial specimens of the novel flattening processes are prepared by folding and cutting the simple quadrangular specimens. Effects of different parameters consist of material type, wall thickness, cross-sectional aspect ratio, and length of the specimens and also, flattening process type and lateral loading direction are discussed on energy absorption performance of the quadrangular specimens. Totally, the performed experiments show that the new lateral energy absorption processes increase specific absorbed energy by the quadrangular specimens up to 7 times; and enhance their total absorbed energy more than 13 times of the corresponding simple specimens.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Thin-Walled Structures - Volume 119, October 2017, Pages 603-614
Journal: Thin-Walled Structures - Volume 119, October 2017, Pages 603-614
نویسندگان
Abbas Niknejad, Pourya Heidari Orojloo, Mojtaba Johari,