A new wideband planar antenna with band-notch functionality at GPS, Bluetooth and WiFi bands for integration in portable wireless systems

Empirical results are presented for a novel miniature planar antenna that operates over a wide bandwidth (500 MHz to 3.05G Hz). The antenna consists of dual-square radiating patches separated by two narrow vertical stubs to reject interferences from GPS, Bluetooth and WiFi bands. Radiating patches and stubs are surrounded by a ground-plane conductor, and the antenna is fed through a common coplanar waveguide transmission line (CPW-TL). The two vertical stubs generate pass-band resonances enabling wideband operation across the following communications standards: cellular, APMS, JCDMA, GSM, DCS, PCS, KPCS, IMT-2000, WCDMA, UMTS and WiMAX. Embedded in the ground-plane conductor is an H-shaped dielectric slit, which has been rotated by 90°, whose function is to reject interferences from GPS, Bluetooth and WiFi bands. Measurements results confirm the antenna exhibits notched characteristics at frequency bands of GPS (1574.4-1576.4 MHz), Bluetooth (2402-2480 MHz) and WiFi (2412-2483.5 MHz). The impedance bandwidth of the antenna is 2.55G Hz for VSWR < 2, which corresponds to a fractional bandwidth of 143.66%. Measured results also confirm that the antenna radiates omnidirectionally in the E-plane with appreciable gain performance over its operating frequency range. The antenna has dimensions of 15 × 15 × 0.8 mm3.