کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4976838 1451843 2017 13 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Two methods for modeling vibrations of planetary gearboxes including faults: Comparison and validation
ترجمه فارسی عنوان
دو روش برای مدل سازی ارتعاشات دنده های سیاره ای شامل گسل ها: مقایسه و اعتبار سنجی
کلمات کلیدی
گیربکس سیاره ای، مدل ارتعاش، گسل محلی دندان،
ترجمه چکیده
گیربکس های سیاره ای جزء مهم بسیاری از کاربردهای صنعتی هستند. تجزیه و تحلیل ارتعاش می تواند طول عمر خود را افزایش دهد و مانع تعمیر و نگهداری گران قیمت شود. با این وجود، تحلیل مؤثر تنها در صورتی امکان پذیر است که ویژگی های ارتعاشات گیربکس های سیاره ای به درستی درک شود. در این مقاله، مدل ها برای مطالعه محتوای فرکانس ارتعاشات گیربکس سیاره ای در شرایط غیر خطا و خطای مختلف مورد استفاده قرار می گیرند. دو مدل متفاوت در نظر گرفته شده است: مدل پدیده شناسی، که یک فرمولاسیون تحلیلی-ریاضی مبتنی بر مشاهدات است و مدل پارامترهای توزیع شده، که بر اساس حل معادلات حرکت سیستم است. نتایج هر دو مدل مستقیما قابل مقایسه نیستند، زیرا مدل پدیدارشناسی ارتعاش را در یک جهت شعاعی ثابت مانند اندازه گیری سنسور ارتعاشی نصب شده بر روی بخش بیرونی چرخ دنده نشان می دهد. از سوی دیگر، مدل پارامتر توزیع شده، ارتعاشات را بر اساس یک فریم مرجع چرخشی ثابت به حامل انجام می دهد. برای غلبه بر این وضعیت، یک تابع برای تجزیه راه حل های مدل پارامترهای توزیع شده به یک قاب مرجع ثابت ارائه شده است. در نهایت، مقایسه نتایج از هر دو دیدگاه مدل و اندازه گیری های تجربی ارائه شده است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی کامپیوتر پردازش سیگنال
چکیده انگلیسی
Planetary gearboxes are important components of many industrial applications. Vibration analysis can increase their lifetime and prevent expensive repair and safety concerns. However, an effective analysis is only possible if the vibration features of planetary gearboxes are properly understood. In this paper, models are used to study the frequency content of planetary gearbox vibrations under non-fault and different fault conditions. Two different models are considered: phenomenological model, which is an analytical-mathematical formulation based on observation, and lumped-parameter model, which is based on the solution of the equations of motion of the system. Results of both models are not directly comparable, because the phenomenological model provides the vibration on a fixed radial direction, such as the measurements of the vibration sensor mounted on the outer part of the ring gear. On the other hand, the lumped-parameter model provides the vibrations on the basis of a rotating reference frame fixed to the carrier. To overcome this situation, a function to decompose the lumped-parameter model solutions to a fixed reference frame is presented. Finally, comparisons of results from both model perspectives and experimental measurements are presented.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanical Systems and Signal Processing - Volume 92, August 2017, Pages 213-225
نویسندگان
, ,