کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4986508 | 1454950 | 2017 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Dry and lubricated wear of rail steel under rolling contact fatigue - Wear mechanisms and crack growth
ترجمه فارسی عنوان
سایش خشک و روانکاری فولاد ریلی تحت خستگی تماس نورد - مکانیسم پوشیدن و رشد کرک
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
خستگی تماس نورد، تریبولوژی ریلدو، اصلاح کننده اصطکاک، آزمایش دیسک دوقلو، فشار سیال،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
In this work, the dry and lubricated wear behavior of rail steels (R370CrHT) under Rolling Contact Fatigue (RCF) conditions was studied in laboratory. A twin-disc rolling-sliding machine was used to reproduce contact conditions under high contact pressure (1.1Â GPa) and high creepage (5%) with the aim of accelerating RCF failure. Two different types of tests were performed, namely dry and lubricated with a friction modifier, to simulate the mechanisms that cause RCF. The results showed an increase of the wear rate in the tests where a friction modifier was added after an initial stage of 4,000 dry cycles. The damage of the surface proceeded by cracks formation during the dry stage followed by accelerated crack growth and flaking due to the effects induced by the friction modifier entering into the original cracks. After several thousand cycles, the flakes were detached from the surface causing high wear rates. The cracks morphology was observed under SEM. The cracks depth and angle with respect to the contact surface were reported and some correlations were made with the mass loss results.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 380â381, 15 June 2017, Pages 240-250
Journal: Wear - Volumes 380â381, 15 June 2017, Pages 240-250
نویسندگان
Santiago Maya-Johnson, Juan Felipe Santa, Alejandro Toro,