کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
4986536 | 1454952 | 2017 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
An investigation into the friction and wear mechanisms of aluminium high silicon alloy under contact sliding
ترجمه فارسی عنوان
تحقیق در مورد اصطکاک و مکانیزم های پوششی آلومینیوم آلی سیلیکون بالا تحت کشش تماس
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آل بالا آلیاژ سی، اصطکاک، پوشیدن، تغییر شکل زیربنایی،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی شیمی
شیمی کلوئیدی و سطحی
چکیده انگلیسی
This paper investigates the friction and wear of aluminium high silicon alloy Al-60Si against EN26 steel. The sliding tests were conducted on a pin-on-disk tribometer and the mechanisms of deformation induced by contact sliding were analysed by SEM and EDS. It was found that subsurface deformation and cracks in silicon particles play a central role in the mechanism variation of friction and wear. Under a low load, cracks appeared beneath the wear track. Matrix extrusion over the wear track took place, resulting in ductile abrasive wear. With increasing the applied load, the matrix material was sheared more, which reduced the extrusion and changed the wear mode to brittle delamination. When the load reached a critical value, deformation and severe cracking appeared in the deeper subsurface and the matrix softened due to frictional heating, leading to accelerated wear. Upon a further increase of the applied load, mechanical mixing of finely fragmented silicon particles took place, and the wear mode experienced a number of changes from “ductile delamination + abrasive”, “brittle delamination/ploughed + abrasive” to “abrasive + ductile delamination”.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Wear - Volumes 376â377, Part B, 15 April 2017, Pages 940-946
Journal: Wear - Volumes 376â377, Part B, 15 April 2017, Pages 940-946
نویسندگان
M.L. Rahaman, Liangchi Zhang,