کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
4992978 1457473 2017 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Function estimation of laser-induced heat generation in a gas-saturated powder layer heated by a short-pulsed laser
ترجمه فارسی عنوان
برآورد عملکرد تولید گرمای حاصل از لیزر در یک لایه پودر گاز اشباع شده توسط لیزر کوتاه پالسی گرم می شود
کلمات کلیدی
مشکل معکوس تولید گرما، رسانه متخلخل گاز، لیزر کوتاه پالسی، فاصله دو فاز،
ترجمه چکیده
در این مطالعه، یک الگوریتم معکوس بر اساس روش شبیه سازی متقابل و اصل اختلاف برای حل مسئله هدایت گرما معکوس با یک معادله دوگانه فاز برای تخمین نسبی گرمای ناشی از لیزر ناشناخته فضا و زمان در یک محیط متخلخل گاز اشباع شده در معرض گرم شدن لیزر کوتاه مدت از اندازه گیری های دما در داخل محیط است. سپس، توزیع دمای ذرات پودر در محیط متخلخل نیز می تواند تعیین شود. داده های دمای به دست آمده از مسأله مستقیم برای شبیه سازی اندازه گیری های دما استفاده می شود. اثر خطاهای اندازه گیری بر دقت برآورد نیز مورد بررسی قرار گرفته است. راه حل معکوس بر اساس آزمایش های عددی که در آن دو فرم مختلف تولید گرما تخمین زده می شود، توجیه می شود. نتایج نشان می دهد که تولید گرمای ناشی از لیزر ناشناخته می تواند دقیقا با استفاده از رویکرد کنونی برای موارد مورد آزمایش در این مطالعه پیش بینی شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی شیمی جریان سیال و فرایندهای انتقال
چکیده انگلیسی
In this study, an inverse algorithm based on the conjugate gradient method and the discrepancy principle is applied to solve the inverse heat conduction problem with a dual-phase-lag equation for estimating the unknown space- and time-dependent laser-induced heat generation in a gas-saturated porous medium exposed to short-pulse laser heating from the temperature measurements taken within the medium. Subsequently, the powder particle temperature distributions in the porous medium can be determined as well. The temperature data obtained from the direct problem are used to simulate the temperature measurements. The effect of measurement errors on the estimation accuracy is also investigated. The inverse solutions are justified based on the numerical experiments in which two different forms of heat generation are estimated. Results show that the unknown laser-induced heat generation can be predicted precisely by using the present approach for the test cases considered in this study.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Communications in Heat and Mass Transfer - Volume 81, February 2017, Pages 56-63
نویسندگان
, , , ,