کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5004349 | 1461195 | 2016 | 11 صفحه PDF | دانلود رایگان |
- A novel technique is proposed to detect bearing defect under time-varying speed.
- Defective and rotation frequencies are extracted by enhanced TF ridge.
- The TF ridge guides the GST to detect the bearing defect.
Healthy rolling element bearings are vital guarantees for safe operation of the rotating machinery. Time-frequency (TF) signal analysis is an effective tool to detect bearing defects under time-varying shaft speed condition. However, it is a challenging work dealing with defective characteristic frequency and rotation frequency simultaneously without a tachometer. For this reason, a technique using the generalized synchrosqueezing transform (GST) guided by enhanced TF ridge extraction is suggested to detect the existence of the bearing defects. The low frequency band and the resonance band are first chopped from the Fourier spectrum of the bearing vibration measurements. The TF information of the lower band component and the resonance band envelope are represented using short-time Fourier transform, where the TF ridge are extracted by harmonic summation search and ridge candidate fusion operations. The inverse of the extracted TF ridge is subsequently used to guide the GST mapping the chirped TF representation to the constant one. The rectified TF pictures are then synchrosqueezed as sharper spectra where the rotation frequency and the defective characteristic frequency can be identified, respectively. Both simulated and experimental signals were used to evaluate the present technique. The results validate the effectiveness of the suggested technique for the bearing defect detection.
Journal: ISA Transactions - Volume 60, January 2016, Pages 274-284