Differential resistance feedback control of a self-sensing shape memory alloy actuated system

• Direct differential resistance feedback control using self-sensing antagonistic shape memory alloy (SMA) wires.
• Sensorless signal conditioning electronic circuit for resistance measurement.
• Achieved angular tracking of ±15° at a frequency of 1 Hz.
• Choice and design of actuators to accomplish the desired final control.
• Influence of input frequency on strain of SMA.

There is a growing trend towards miniaturization, and with it comes an increasing need for miniature sensors and actuators for control. Moreover situations occur wherein implementation of external physical sensor is impossible, here self-sensing lends its hand appropriately. Though self-sensing actuation (SSA) is extensively studied in piezoelectric, exploring this property in shape memory alloy is still under study. A simple scheme is developed which allows differential resistance measurement of antagonistic shape memory alloy actuated wires to concurrently sense and actuate in a closed loop system. The usefulness of the proposed scheme is experimentally verified by designing a one link manipulator arm and is performed in a real time tracking control. In a practical implementation of the self-sensing actuator a newly proposed signal processing electronic circuit is used for direct differential resistance feedback control upto a bandwidth of 1.8 Hz. The control design uses fuzzy PID which requires no detailed information about the constitutive model of SMA. At an operating frequency of 1 Hz, the result of the self-sensing feedback control with an angular tracking accuracy of ±0.06° over a movement range of ±15° is demonstrated.