کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
5005275 | 1369018 | 2009 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Pressure transmitter accuracy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
This paper discusses the key causes of calibration drift in pressure transmitters and procedures for calibrating pressure transmitters to ensure their accuracy. Calibrating pressure transmitters involves adjusting the potentiometers in the sensor that controls the zero (lowest pressure at which a transmitter is calibrated) and span (the range of pressure the transmitter is to indicate) of the transmitter. The initial or bench calibration of pressure transmitters involves using a constant pressure source such as a deadweight tester. Once the transmitters are installed, temperature, pressure, humidity, vibration, maintenance activities, and normal aging can degrade their accuracy. Transmitter accuracy can also be degraded by transmitter sensing lines, when the water in a sensing line reference leg boils off, when non-condensable gases in the reference leg dissolve, and when voids, blockages, freezing, or leakage occur in sensing lines. On-line calibration techniques enable plants to avoid these accuracy problems by monitoring the output of an individual transmitter.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: ISA Transactions - Volume 48, Issue 4, October 2009, Pages 383-388
Journal: ISA Transactions - Volume 48, Issue 4, October 2009, Pages 383-388
نویسندگان
H.M. Hashemian, Jin Jiang,