Extension of IMC tuning correlations for non-self regulating (integrating) processes

The filter term of a PID with Filter controller reduces the impact of measurement noise on the derivative action of the controller. This impact is quantified by the controller output travel defined as the total movement of the controller output per unit time. Decreasing controller output travel is important to reduce wear in the final control element. Internal Model Control (IMC) tuning correlations are widely published for PI, PID, and PID with Filter controllers for self regulating processes. For non-self regulating (or integrating) processes, IMC tuning correlations are published for PI and PID controllers but not for PID with Filter controllers. The important contribution of this work is that it completes the set of IMC tuning correlations with an extension to the PID with Filter controller for non-self regulating processes. Other published correlations (not based upon the IMC framework) for PID with Filter controllers fix the filter time constant at one-tenth the derivative time regardless of the model of the process. In contrast, the novel IMC correlations presented in this paper calculate a filter time constant based upon the model of the process and the user's choice for the closed-loop time constant. The set point tracking and disturbance rejection performance of the proposed IMC tunings is demonstrated using simulation studies and a bench-scale experimental system. The proposed IMC tunings are shown to perform as well as various PID correlations (with and without a filter term) while requiring considerably less controller action.